Black Box LPM600A network media converter 100 Mbit/s Multi-mode
Black Box LPM600A. Maximum data transfer rate: 100 Mbit/s, Converter input interface: 100Base-TX,10Base-T, Converter output interface: 100Base-FX. Fiber optic connector: SC, Connectivity technology: Wired. Maximum transfer distance: 2000 m, Fiber mode structure: Multi-mode. Product colour: Black. Input voltage: 100 - 240 V, AC input frequency: 50 - 60 Hz, Power consumption (typical): 24 W
Product Description
Quick Facts
- Get powered, and extend your network up to 2 kilometers (1.2 mi.) over fiber.
- Convert 10-/100-Mbps copper cabling to 100-Mbps fiber optic cabling.
- Undercurrent and overcurrent detection and load sensing.
Further Details
Constrained by the distance limits of PoE over copper? Incorporate fiber into your network!
This PoE PSE Media Converter not only enables you to connect copper cables to long-distance fiber data links, it also safely powers compatible devices plugged in on the copper side.
Fully compliant with the 802.3af Power over Ethernet (PoE) standard, the converter functions as power source equipment (PSE) to provide -48 VDC power via copper wiring to access points, cameras, and similar devices in areas without nearby power outlets.
For equipment protection, it offers overcurrent and undercurrent detection, as well as fault protection input and power monitoring. It also has powered device signature sensing to detect when a 802.3af compliant device is connected downstream.
Plus, link-fault passthrough and far-end fault detection features keep you from sending valuable data across invalid links.
- Get powered, and extend your network up to 2 kilometers (1.2 mi.) over fiber.
- Convert 10-/100-Mbps copper cabling to 100-Mbps fiber optic cabling.
- Undercurrent and overcurrent detection and load sensing.
Further Details
Constrained by the distance limits of PoE over copper? Incorporate fiber into your network!
This PoE PSE Media Converter not only enables you to connect copper cables to long-distance fiber data links, it also safely powers compatible devices plugged in on the copper side.
Fully compliant with the 802.3af Power over Ethernet (PoE) standard, the converter functions as power source equipment (PSE) to provide -48 VDC power via copper wiring to access points, cameras, and similar devices in areas without nearby power outlets.
For equipment protection, it offers overcurrent and undercurrent detection, as well as fault protection input and power monitoring. It also has powered device signature sensing to detect when a 802.3af compliant device is connected downstream.
Plus, link-fault passthrough and far-end fault detection features keep you from sending valuable data across invalid links.
Features and Technical Specifications
| Network | |
|---|---|
| Duplex system | Full, Half |
| Auto MDI/MDI-X | |
| Ethernet LAN data rates | 10,100 Mbit/s |
| Ethernet interface type | Fast Ethernet |
| Networking standards | IEEE 802.3x |
| Converter output interface | 100Base-FX |
| Converter input interface | 100Base-TX,10Base-T |
| Maximum data transfer rate | 100 Mbit/s |
| Ports & interfaces | |
|---|---|
| Fiber optic connector | SC |
| Fiber ports quantity | 2 |
| Ethernet LAN (RJ-45) ports | 1 |
| Connectivity technology | Wired |
| Performance | |
|---|---|
| Fiber mode structure | Multi-mode |
| Maximum transfer distance | 2000 m |
| Design | |
|---|---|
| LED indicators | Y |
| Product colour | Black |
| Internal | |
| Power | |
|---|---|
| Power over Ethernet (PoE) | |
| Power consumption (typical) | 24 W |
| AC input frequency | 50 - 60 Hz |
| Input voltage | 100 - 240 V |
| Management features | |
|---|---|
| Plug and Play | |
| Weight & dimensions | |
|---|---|
| Height | 41 mm |
| Depth | 133 mm |
| Width | 159 mm |
| Technical details | |
|---|---|
| Sustainability certificates | RoHS |